Payment Type: | L/C,T/T,D/P,Paypal,Money Gram,Western Union |
---|---|
Incoterm: | FOB,CFR,CIF,FCA,CPT |
Min. Order: | 1 Piece/Pieces |
Delivery Time: | 10 Days |
Model No.: DE-ACS
Charger controller
The PV charge controller works as a voltage regulator, its primary function is to prevent the battery from being overcharged by the P.V array, being overly discharged by the load, or both.
Controller types:
• Single Stage controllers:
This type of controllers prevents battery overcharging by switching the PV array off when the battery voltage reaches the state of charge set point. The array and battery are automatically reconnected when the battery voltage reaches a lower value called the charge resumption.
• Pulse Width Modulation (PWM) controllers:
PWM controllers are the most common controller on the market today. These charge the battery by rapidly switching the full charging current on and off when the battery reaches a fully charged state. The length of the charging current pulse gradually decreases as battery voltage rises, reducing the average current into the battery.
Our Difference
SATISFACTORY SERVICE
- 15 working days delivery
- 5 years warranty
- on-site installation instruction
ADVANCED LIGHTING TECHNOLOGY
- Design for lighting applications
- Dimming and operating profiles for adaptive lighting
- Superior LED luminaires
CUSTOM SOLUTION FOR YOUR APPLICATION
- Precision- engineered for your application
- Array for solar engines available for your application
- Aesthetic- design and value-built engine options
Production Description
Features:
1- 12V/24VDC auto recognized system voltage
2- Build-in constant current LED driver, with 91%-96% output efficiency
3- Dusk to dawn and dimming function, four periods and 10%-90% dimming value adjustable
4- 3-stage charging battery: bulk, boost/equalize, float
5- Suitable for four battery types: gel, flooded, sealed and li-ion
6- Three LED indicators to show solar PV, battery and LED lights working status
7-Digital display and setting button to adjust time and dimming value
8- Aluminum housing and high heat conducting silicone sealed to better cooling
9- Waterproof IP67
Protection:
1- PV reverse polarity protection
2- Battery reverse polarity protection
3- Battery over charge protection
4- Battery over discharge protection
5- Load short circuit protection
6- Load overload protection
The most advantage -- Small design, Infrared remote control and dimming
With the lithium ion battery popularly application in solar street lights, users will design all kinds of box to install battery and solar street light charge controller all in one, and this DE-ACS street light charge controller is very suitable for option because of its smaller size and light weight.
Model Choice:
DE-ACS solar street light charge controller is integrated infrared sensor, constant current LED driver, so it also demands to LED lamp: LED lamp mustn't be with LED driver, and LED lamp's voltage current and power according to the following form:
Model In Series N In Parallels K Max. LED power Max. solar PV power DE-ACS 10A12V 5≤N≤1
4(15V~50V) 1≤K≤9
(30mA~2700mA) ≤25W ≤180W DE-ACS 10A24V 10≤N≤14
(30V~50V) 1≤K≤9
(30mA-2700mA) ≤25W ≤360W
LED Lamp Working Mode:
DE-ACS solar street light charge controller is with five periods time (000min-720min) with 000mA-2700mA. Users can adjust the time with output current on remote control.
Model DE-ACS Rated charge current 10A System voltage 12V; 24V Solar PV input voltage <50VDC Solar PV power 180W/12V; 360W/24V Output Current 30mA-2700mA Max. Output Power 25W/12V; 50W/24V Output voltage Battery voltage +2V~50V LED constant current efficiency ≥ 92.8% (typically 94.5%) 24V, system is available for 95.3% Load loss Normal mode ≤ 7 mA, power-saving mode ≤ 3.5 mA Charging circuit voltage drop Not more than 0.26V Discharging circuit voltage drop Not more than 0.15V 12V 24V auto recognized voltage 17V Operating temperature Industrial: -35 ℃ to +55 ℃ (suffix I) Boosting voltage 14.6V; × 2/24V; (duration: 10min) (Adjustable) Equalize voltage 14.4V; × 2/24V; (duration: 10min) Float voltage 13.6V; × 2/24V (Adjustable) Charge return voltage 13.2V; × 2/24V Temperature compensation -4.5mv / ℃ / 2V Under voltage warning voltage 12.0V; × 2/24V; Over discharge voltage 11.1V; × 2/24V; (Adjustable) Over discharge voltage return 12.6V; × 2/24V; (Adjustable) Dimension/ N.W 100*74*26mm/0.30kg Light on/off 5.0V (Adjustable) waterproof IP67 Control PWM charge mode DE-ACS-RC remote control Only one DE-ACS-RC can control all DE-ACS series solar street light controller Inside battery type AAA battery Voltage 3V Sending distance <10 meters Reading distance <7 meters Dimension and weight 140*56*17mm/ 90g
Connecting:
Like other solar street light charger controllers, Connect solar panel, solar battery and LED lamp wires to JWL-UL controller's wires. But users can check the whole solar street lighting system connecting rightly only by the LCD remote control on-site situation.
Solar street light project installation guidelines
LED POWER | LUMINOUS FLUX | SUITABLE FOR POLE | LIGHTING DISTANCE | STREET WIDTH | REPLACE |
20W/12V | 2400LM | 4-5M | 10-15M | 4-6M | 100W HPS |
30W/12V | 3600LM | 5-6M | 15-20M | 6-8M | 150W HPS |
40W/24V | 4800LM | 6-8M | 20-25M | 8-10M | 180W HPS |
60W/24V | 7200LM | 8-10M | 20-25M | 8-10M | 250W HPS |
80W/24V | 9600LM | 8-10M | 25-30M | 10-12M | 400W HPS |
100W/24V | 1400LM | 10-12M | 30-35M | 10-15M | 500W HPS |
120W/24V | 16800LM | 10-12M | 35-40M | 12-18M | 600W HPS |
Package for Solar led Street Lamp
Package: Export standard carton with foam inside for tough handling and long-distance ocean transport
Production process
Payment & Delivery
Payment terms T/T
EXW 30% In advance, 70% before delivery
FOB CFR/C&F 30% In advance, 70% against copy of B/L CIF L/C Total amount above USD50,000, we accept L/C at sight West Union Total amount less than USD5,000 PayPal Delivery time 15-20 working days after receiving down payment for one container
FAQ:
Q1. Can I have a sample order for solar charge controller
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 2-3 weeks for order quantity more than one container
Q3. Do you have any MOQ limit for solar charge controller order?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: Airline and sea shipping also optional. Shipping time depends on distance.
Q5. How to proceed an order for solar charge controller?
A: Firstly let us know your requirements or application.
Secondly We provide solution according to local sun weather conditions.
Thirdly customer confirms the samples and formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on solar charge controller product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 3-5 years warranty to our products.
Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.
Thank you for visiting our website, further questions please feel free to contact us. We will do our best to support you all the time.
Contact us if you need more details on LED Street Light Controller. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Over-Voltage Protection Controller、PMW Programmable Controller. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Controller > Solar Street Light Controller