Product overview:

Model: LK-50-1 meter counter

Structure, working principle and application:

LK series length measuring sensor, by measuring the long drive wheel, a measuring signal receiving and signal input circuit, a driving wheel and the measured by (such as textile, plastic belt) reverse rolling friction, or reverse the analyte and spindle production host rolling through the sensor inside the gear ratio and the signal phase combined with the actual length of the measured signal output unit to counter (Ji Changyi), the counter (Ji Changyi) to record the total length.

This series of products with a counter or Instrument with widely used in printing machinery, packaging machinery, textile machinery, rubber machinery, plastic wire and cable equipment, pharmaceutical machinery and all production process requires automatic detection of product length occasions.

Use note:
1. the fixed position is not limited, but the rotation direction of the runner must be parallel to the direction of the object to be measured.
2. avoid contact with organic solvent, oil, water or high temperature.
3. the site of violent vibration, in addition to causing counting error, but also easy to cause mechanical damage.
4. the material with large elasticity, the force of the contact surface.
5. due to the uncertainty of the origin, the error of the first output signal length is between 0.30 and 50% after the power supply is put into operation.
6. precision error plus or minus a unit of length.